Learn how to sew a pillow cover with simple, clear instructions for a beginner.
Course Sewing
Cuisine American
Keyword DIY pillow cover, sew a pillow cover
Cook Time 1 hourhour
Total Time 1 hourhour
Servings 1
Author Lisa Bass
Cost 5
Equipment
Sewing machine
Ingredients
123″ x 23″ piece square fabric of your choice
216″ x 23″ rectangle pieces of fabric the same as the square piece
Instructions
HEMMING THE RECTANGLE BACK PIECES
First, take the 23″ side, of one of the 23″ x 16″ pieces, and press it over 1/2″.
Next, press it over another 1/2″ so that the raw edge is hidden inside. Sew in place with a 3/8″ inch seam.
Repeat with the other 22 1/2″ x 16″ piece. These will be the back pieces for the pillow cover.
PINNING THE BACKS ON THE PILLOW COVER FABRIC CUT FRONT
Next, line up the 23″ x 16″ back fabric piece edges with the 23″ edges of the front square piece, with right sides together.
SEW A SEAM
Next, sew down the edge of the hem. I like to take this step slowly. I like to line up the stripes, and then sew a little ways, and then stop to check that they are still lined up, then sew a little more.After both the sides are sewn down, overlap the two sides, and then pin the top and bottom seam, being sure that you catch all the layers.
Around the middle there will be three layers overlapping, both back pieces and the front piece.Sew the top and bottom pieces in place with a 3/8″ seam.
Finish all the edges with a serger, or a zig zag stitch on you sewing machine.
Video
Notes
To make it easy, try and select a fabric with out a directional fabric.